In heavy machine tools, steel rolling and high-end forming industries, metal components of large machinery (such as cast iron machine beds, rolling mill rolls, forming equipment frames) are the core carriers of production. However, these components are long exposed to harsh environments including humidity, high temperature, dust and chemical media (rolling oil, coolant), easily causing rust, peeling and accuracy decline. According to industry statistics, equipment failures caused by metal corrosion account for more than 30% of industrial failures, increasing annual maintenance costs by 15%-20% for enterprises.
With 20 years of deep cultivation in the industrial anti-corrosion field, FLDC has developed scenario-based customized anti-corrosion solutions targeting the protection pain points of large industrial machinery metal surfaces. Covering core application scenarios such as cast iron machine tools, rolling mills and forming equipment, it builds an “unbreakable protective shield” for equipment metal surfaces with three core advantages: strong adhesion, high weather resistance and long-term protection.
1. Scenario-Based Applications: Precisely Matching Anti-Corrosion Needs
1.1 Cast Iron Machine Tools: Solving Deep Corrosion of Porous Substrates
Cast iron components of machine tools (beds, guide rails, worktables) are easy to absorb moisture and impurities in the air due to their porous material properties. Traditional anti-rust paints are difficult to penetrate and seal the pores, leading to “inside-out” corrosion in a short time.
FLDC customized penetrating epoxy anti-corrosion system for cast iron substrates:
- The primer adopts high-permeability resin, which can penetrate deep into cast iron pores to form an “anchoring structure”, seal micro gaps of the substrate and prevent the intrusion of corrosive media.
- The topcoat uses modified polyurethane resin, with salt spray resistance up to 1,200 hours (far exceeding the 800-hour standard of GB/T 1771-2021), hardness ≥ 2H, resistant to cutting fluid immersion and tool impact wear.
Application Case: A heavy machine tool factory applied it to 200 CNC lathe cast iron beds. After 3 years of use, there was no obvious rust on the beds, the guide rail accuracy retention rate increased by 90%, maintenance frequency reduced from 2 times per year to 1 time per 5 years, saving more than 180,000 yuan in annual maintenance costs.
1.2 Rolling Mills: Withstanding Dual Tests of High Temperature and Media
Metal parts such as rolls, frames and housings of steel and non-ferrous metal rolling mills (cold rolling mills, warm rolling auxiliary equipment) need to withstand normal operating temperature of 200-250℃ (short-term peak temperature of 280℃). Meanwhile, they face friction of metal coils and corrosion of rolling oil and emulsion. Ordinary coatings are prone to high-temperature softening and medium swelling and peeling.
FLDC epoxy phenolic anti-corrosion coating achieves targeted breakthroughs (temperature resistance up to 250℃):
- Adopting epoxy phenolic resin formula, combining strong adhesion of epoxy and high temperature resistance of phenolic. It has no discoloration or cracking under long-term use at 250℃, and maintains coating integrity even under short-term peak high temperature.
- Coating wear coefficient (HV) ≥ 800, resistant to friction loss of metal coils. It also withstands 1,000 hours of rolling oil and emulsion immersion without swelling or peeling.
- Adhesion reaches 5MPa (GB/T 5210-2006 standard), closely fits the metal surface of rolling mills, resists vibration and impact during equipment operation, and prevents coating peeling.
Application Effect: After application in the cold rolling workshop and warm rolling auxiliary equipment of a steel group, the replacement frequency of rolling mill rolls due to high-temperature corrosion was significantly reduced. The service life was extended from 18 months to 30 months, reducing shutdown roll change times, and increasing annual steel output by about 15,000 tons.
1.3 Forming Equipment: Resisting Comprehensive Erosion of Complex Environments
Equipment such as auto parts forming machines and hardware stamping machines often face complex corrosion environments of “humidity fluctuation + dust adhesion + material residue” on the machine body, mold mounting surfaces and transmission parts, easily leading to equipment accuracy deviation and component jamming.
FLDC weather-resistant anti-corrosion coating provides full-dimensional protection:
- Introducing fluorocarbon resin components, with weather resistance up to 500 hours (xenon lamp aging test), resistant to high humidity in workshops and outdoor ultraviolet radiation, no chalking or fading.
- Surface smoothness reaches Ra ≤ 0.8μm, easy to clean dust and material residue, reducing local corrosion caused by impurity accumulation.
- Compatible with steel, cast iron, aluminum alloy and other metal substrates, can be formed by one-time spraying, adapting to the protection needs of multi-material components of forming equipment.
Customer Feedback: After application by an automobile stamping enterprise, the corrosion rate of forming equipment body decreased from 25% to 3%, the accuracy deviation of mold mounting surface was controlled within 0.02mm, and the product qualification rate increased by 2.3%.

2. Core Advantages: Beyond Corrosion Protection, Cost Reduction and Efficiency Increase
- Environmental Compliance, Suitable for Workshop Production: Complies with national standard GB 18581-2020, VOC content ≤ 80g/L, no heavy metals such as lead, mercury and cadmium. It can be constructed directly in the workshop without additional ventilation, ensuring the health of operators.
- Convenient Construction, Reducing Labor Cost: Supports room temperature curing (fully cured in 24 hours at 25℃), no high-temperature baking equipment required. Multiple processes such as spraying, brushing and roller coating are available. One worker can construct 150㎡ per day, 40% more efficient than traditional coatings.
- Long-Term Protection, Reducing Life-Cycle Costs: The service life of the coating is generally 8-12 years, 2-3 times that of ordinary anti-corrosion coatings (3-5 years). Taking a medium-sized rolling mill as an example, using FLDC epoxy phenolic anti-corrosion coating can reduce 2 repaints, saving more than 500,000 yuan in anti-corrosion costs throughout the life cycle.
3. Why Choose FLDC: 20 Years of Experience, Customized Solutions
From “pore sealing” of cast iron machine tools, to “250℃ high temperature resistance + medium corrosion resistance” of rolling mills, and then to “weather and stain resistance” of forming equipment, FLDC always takes “actual equipment demand” as the core, providing full-process services from substrate testing, coating selection to construction guidance.
So far, it has served more than 320 industrial enterprises nationwide, covering machine tool manufacturing, steel metallurgy, auto parts and other fields, and has accumulated more than 200 million yuan in corrosion loss reduction for customers.
If your enterprise is facing anti-corrosion problems of large industrial machinery metal surfaces, welcome to contact Hubei FLDC Coatings for free substrate testing and customized anti-corrosion solutions.
