conductive epoxy coating

Design Usage

1. Suitable for coatings with high anti-corrosion performance requirements on steel or concrete floors that require electrostatic conductivity.
2. Such as: the inner walls of storage tanks for petrochemical products and chemicals can also be used for ground electrostatic coating.

1. Excellent static conductive properties;

2. Cathodic protection for steel surfaces;
3. Excellent chemical resistance;
4. The paint film is hard, wear-resistant and collision-resistant;
5. Strong adhesion to steel and concrete surfaces.

Product Composition:
Special epoxy resin + pigment + filler + advanced conductive material + solvent + additives, etc.

Technical Indicators:

Item	Index
Color	Various Colors
Viscosity	(15.25±1ºC) 80 ≤ s ≤ 100
Solid content	≥ 50%
Adhesion	Level 1
Flexibility	1mm
Impact resistance	≥ 50 (kg·cm)
Hardness	≥ 0.5 (double pendulum)
Surface Resistivity	≤ 109Ω
Volume Resistivity	105-108 (Ω·m)
Heat Resistance	160ºC-180ºC
Minimum Curing Temperature	10ºC

Construction Parameters:

Item	Index
Component	Two components A and B
Weight Ratio	A : B = 4 : 1
Theoretical Coating Rate	4-5m²/kg (Average value, smooth surfaces are not included in the loss)
Paint Film Thickness	WFT	175μm
	DFT	80μm
Applicable Time (25ºC)	3h
Aging Time (25ºC)	0.5h
Drying time (25±1ºC)	Surface drying	8h
	Actual drying	24h
	Fully cured	7d