Biomedical and vaccine GMP sterile workshops have extremely strict requirements for floor antibacterial rate, dust emission and VOC content. Ordinary epoxy floors are prone to mold growth and residual volatile substances, which cannot meet the high-standard sterile production environment requirements of biopharmaceutical products.

FLDC high-standard antibacterial sterile polyurethane flooring system specially for biomedical GMP workshops:

1. Low-odor environmental sealing primer: Zero pollution to sterile production environment

2. Elastic crack-proof PU base layer: Adapt frequent high-temperature disinfection cycles

3. High-efficiency antibacterial and anti-mold topcoat: Inhibit bacterial and mold reproduction

Core Advantages:

✅ High antibacterial rate ≥99.2%, meet GMP sterile production standards

✅ Ultra-low VOC formula, compliant with biomedical environmental requirements

✅ Elastic structure resist cracking under repeated high-temperature disinfection

✅ Seamless pore-free, no bacteria and dust residue dead corners

✅ Resistant to frequent alcohol and disinfectant wiping

Suitable for biological preparation, vaccine production and cell therapy laboratories. Request GMP certification documents.

Heavy machinery assembly workshops face severe working conditions: heavy steel component falling impact, long-term forklift and trolley rolling, and mechanical oil contamination. Ordinary thin epoxy floors are prone to pits, cracks and wear marks, which cannot withstand long-term heavy-load mechanical operation and affect workshop production efficiency and ground cleanliness.

FLDC ultra-high compression heavy-duty epoxy mortar flooring system for machinery manufacturing assembly workshops:

1. Reinforced penetration primer: Consolidate loose concrete to prevent floor hollowing

2. Thickened high-strength mortar bearing layer: Resist heavy impact and extreme compression

3. Oil-resistant wear-resistant matte topcoat: Anti-fouling and easy daily maintenance

Core Advantages:

✅ Ultra-high compressive strength, no pits under heavy component impact

✅ Super wear resistance, adapt 24-hour forklift and heavy trolley rolling

✅ Dense film resists mechanical oil penetration, easy to clean oil stains

✅ Tough and crack-resistant, long service life under heavy load operation

✅ Seamless and dust-free, keep assembly workshop tidy

Ideal for engineering machinery, equipment assembly and heavy parts processing workshops. Request customized load-bearing solutions.

Lithium battery cathode material production workshops rely heavily on NMP solvent in the batching and coating process. Ordinary ESD floors swell, delaminate and lose static resistance after NMP splashing, and volatile substances will affect the purity of battery materials. It is urgent to adopt high chemical resistant and low VOC special flooring to ensure production yield and safety.

FLDC dedicated NMP-resistant constant-resistance dust-free ESD flooring system for lithium battery cathode workshops:

1. Zero VOC impurity-locking sealing primer: No volatile pollution to battery materials

2. High cross-linking solvent-resistant main layer: Long-term resistance to NMP and lithium salt medium

3. Constant-resistance matte dust-free topcoat: Stable anti-static and easy cleaning

Core Advantages:

✅ 72-hour NMP solvent soaking resistant without swelling or peeling

✅ Stable surface resistance 10⁶~10⁹Ω, no static performance attenuation

✅ Zero VOC formula, guarantee high purity of lithium battery raw materials

✅ Seamless dust-free structure, avoid fine powder residue accumulation

✅ Dual protection of chemical resistance and static prevention for battery production

Suitable for cathode powder batching, slurry mixing and coating production areas. Request professional anti-solvent test reports.

Urban underground comprehensive utility tunnels are typical closed dark and humid environments with perennial water seepage, mold and microbial reproduction. The internal steel supports, cable bridges and equipment shells face long-term damp corrosion and microbial erosion. Ordinary paint is prone to mildew, blistering and rusting, which affects the safe operation of power and communication pipelines.

FLDC customized three-layer long-term moisture-proof and anti-microbial anti-corrosion system for underground pipe gallery steel facilities:

1. Deep penetrating moisture-locking primer: Block underground capillary water infiltration

2. Dense waterproof barrier intermediate coat: Isolate damp and mold medium

3. Anti-mold anti-corrosion weatherable topcoat: Inhibit microbial growth and long-term anti-rust

Core Advantages:

✅ Special adaptation to closed underground high-humidity dark environment

✅ Effectively resist underground water seepage and damp persistent erosion

✅ Long-term anti-mold and anti-microbial performance, no mildew breeding

✅ No peeling or blistering after long-term underground operation

✅ Extend service life of urban underground pipe gallery infrastructure

Widely used in municipal underground pipe gallery new construction and renovation projects. Contact us for engineering bidding documents.

Paper mill steaming and pulping equipment operates in long-term high-temperature steam and high-humidity condensation environment. The steel surface is continuously eroded by hot steam, pulp liquid and residual alkaline chemical medium. Ordinary industrial coatings suffer from blistering, delamination and accelerated rusting under alternating hot and humid conditions, resulting in frequent shutdown maintenance and affecting paper mill continuous production efficiency.

FLDC professional three-layer high-temperature and humidity resistant anti-corrosion system for paper mill autoclave and pulping steel equipment:

1. High-temperature stable anti-rust primer: Maintain adhesion under steam high temperature environment

2. Steam barrier thick-film intermediate coat: Block hot steam and condensate penetration

3. Alkali-resistant chemical protective topcoat: Resist pulp alkaline medium erosion

Core Advantages:

✅ Adapt long-term paper mill high-temperature steam and humid working conditions

✅ Effectively resist condensate water accumulation and steam aging peeling

✅ Excellent resistance to pulp alkaline chemical medium corrosion

✅ Stable adhesion under frequent temperature and humidity alternation

✅ Reduce paper mill equipment maintenance frequency and production loss

Suitable for paper pulping tanks, steaming autoclaves and workshop steel structures. Request customized industrial coating solutions.

With the rapid expansion of new energy vehicle production in 2026, chassis and frame corrosion and stone impact damage have become core pain points for vehicle durability. EV chassis runs on complex road conditions all year round, facing continuous gravel stone impact, rainwater immersion, and winter road salt corrosion. Ordinary rigid automotive paint is easy to chip, crack and rust, leading to chassis water leakage and reduced vehicle service life.

FLDC customized three-layer flexible anti-corrosion & anti-stone-chip system exclusively for new energy vehicle chassis frames:

1. High-adhesion anti-rust primer: Firmly bond with automotive steel plate, prevent hidden rust

2. Elastic thick-film anti-impact middle coat: Absorb gravel impact energy, avoid chipping

3. Waterproof and salt-tolerant protective topcoat: Block road corrosive medium penetration

Core Advantages:

✅ High elasticity formula, effectively resist road gravel stone impact and chipping

✅ Long-term resistance to rainwater soaking and deicing salt corrosion

✅ Excellent bending performance, adapt chassis vibration without cracking

✅ Insulating and waterproof, protect EV bottom electrical components

✅ Improve vehicle chassis durability and extend overall service lifeWidely used in new energy passenger cars, commercial vehicles and engineering vehicle chassis supporting projects. Contact us for automotive-level test reports.

Professional cold storage and frozen food logistics warehouses operate in long-term low-temperature and high-humidity environments. Ordinary epoxy floors cannot cure normally below 5℃ and are prone to frost cracking and peeling under freeze-thaw cycles. It is difficult to meet the anti-slip, dust-free and durable use requirements of cold storage low-temperature working conditions.

FLDC special low-temperature resistant polyurethane anti-slip flooring system for cold storage warehouses:

1. Low-temperature curing sealing primer: Normal film forming in cold humid base

2. Elastic freeze-resistant PU intermediate layer: Resist freeze-thaw cycle stress cracking

3. Textured anti-slip dust-free topcoat: Safe walking under low-temperature frost environment

Core Advantages:

✅ Stable curing and film forming under 0℃ low-temperature environment

✅ Excellent freeze-thaw resistance, no cracking or peeling in long-term cold storage

✅ Textured anti-slip performance, prevent slipping caused by ground frost

✅ Seamless dust-free, ensure frozen food storage hygiene

✅ Tough and wear-resistant, adapt forklift frequent rolling

Suitable for frozen food warehouses, low-temperature sorting workshops and cold chain logistics bases. Request cold-resistant test documents.

Airport terminals belong to high-flow public transportation hubs, with continuous pedestrian flow, luggage trolley rolling and ground equipment heavy load. Traditional floor tiles are easy to hollow and crack, while ordinary epoxy floors are single in color and poor in wear resistance, unable to meet the dual requirements of high-end decoration and long-term heavy-duty use of airport public areas.

FLDC high-end seamless epoxy color sand flooring system specially for airport terminal public areas:

1. Reinforced penetrating sealing primer: Consolidate concrete base, prevent hollowing

2. High-strength color sand main layer: Integrate wear resistance and decorative texture

3. Anti-fouling transparent wear-resistant topcoat: Easy daily cleaning and long-term bright

Core Advantages:

✅ Super heavy load bearing, adapt long-term trolley and equipment rolling

✅ Moderate anti-slip texture, safe for large passenger flow walking

✅ Seamless integral, no dust and no sanitary dead corners

✅ Customizable color matching, high-end and consistent terminal decoration

✅ Anti-fouling and easy to clean, reduce airport daily maintenance pressure

Ideal for airport waiting halls, corridors and service public areas. Request color matching schemes.

Lithium battery positive and negative electrode material production workshops use a large amount of NMP organic solvent and lithium salt medium in the production process. Ordinary ESD floors are prone to swelling, delamination and failure of anti-static performance after solvent splashing. Static sparks and medium corrosion seriously threaten battery production safety and product yield.

FLDC dedicated NMP-resistant constant-resistance ESD flooring system for lithium battery material workshops:

1. Low-volatile dust-locking sealing primer: No pollution to battery raw materials

2. High cross-link chemical resistant intermediate layer: Resist NMP and lithium salt medium erosion

3. Stable conductive matte self-leveling topcoat: Constant static resistance without attenuation

Core Advantages:

✅ Specially formula resist NMP solvent and lithium salt long-term splashing

✅ Stable surface resistance 10⁶~10⁹Ω, no static performance decay

✅ Low VOC zero volatile residue, guarantee battery material purity

✅ Seamless and easy to clean, avoid solvent residue accumulation

✅ Anti-corrosion and anti-static dual protection for battery production safety

Suitable for lithium powder, electrode slurry and battery material batching workshops. Request professional test reports.

Inland mountain photovoltaic power stations feature typical hot and humid climate, with frequent rainfall, heavy dew and strong ultraviolet radiation all year round. PV steel brackets are eroded by alternating damp and dry environment for a long time. Ordinary anti-rust paint is easy to blister, rust and fade rapidly, resulting in bracket corrosion and affecting photovoltaic power generation stability and service life.

FLDC customized three-layer damp-proof and weather-resistant anti-corrosion system specially for mountain PV support steel structures:

1. Moisture-proof penetrating anti-rust primer: Adapt humid mountain base, prevent flash rust

2. Dense barrier intermediate coat: Block rainwater and moisture penetration

3. UV-resistant color-retention topcoat: Long-term anti-aging for mountain strong sunlight

Core Advantages:

✅ Perfectly adapt inland mountain high-temperature and high-humidity climate

✅ Resist frequent rainwater scouring and dew damp erosion

✅ Excellent UV resistance, no fading or chalking for long-term outdoor exposure

✅ Flexible film adapt mountain wind vibration without cracking

✅ Improve PV bracket stability and extend power station service life

Widely used in inland mountain photovoltaic base projects. Contact us for free project solutions.